When you are looking for a metal cutting tool then I think there is no other better metal cutting tool than plasma cutter. If you are in need of a tool that has the ability to cut through a wide variety of material it can be copper, metal or steel then the tool you should look for is plasma cutter.
Overview about plasma cutter
Plasma cutter is really a process in which materials, such as primary metals can be cut by means of an accelerated Jet of hot plasma. Materials that are usually cut with a hot plasma torch is included with steel, stainless steel, and aluminum copper and brass.
A plasma cutting tool basically uses a copper nozzle to compress a stream of gas with an arc running through this cutter. This cutter has a hop which contains electrode from inside the torch to another object. You can call this cutter a transferred arc.
Benefits of a plasma cutter
One of the biggest benefits of using a plasma cutter is it helps to keep the materials cool even though you can operate it at high temperature. This cutting tool prevents the material from being cut from warping and from damage to the paint or any other type of coating that may be on the metal of being cut.
Plasma cutter basically prevents the material from being cut. This cutter can be cost-effective depending on the type of job you are performing on it.
Another advantage of using this plasma cutter is that this cutter is less expensive than other types of the cutter.
The other biggest advantage of using plasma cutter is it’s the ability to cut non-ferrous metals such as stainless steel, aluminum, cast iron by this way the materials of plasma cutter becomes more common in most of the applications.
When to use plasma cutting process
Plasma is an ionized gas that conducts electricity and it is created by adding energy to an electrically neutral gas. The energy of this cutter maintains gas and electricity which typically compressed air. Both of these elements of plasma cutter are combined in a chamber between an electrode and nozzle which cause the gas to become an imbalance.
Plasma cutter does not require the metal to be preheated before cutting. This cutter saves your most valuable time and also outperforms oxy-fuel torches while cutting stacked metals. You can achieve faster speed at thinner metals with minimal or no metal distortion.
What should be your budget?
I think the budget should depend on the quality of the plasma cutter you want. If you want to cut thicker metal then you can select a cutting tool between $300 to $500. But if you want to cut medium-sized metal then you have to select a plasma cutter between $500 to $800. If you are a homemade welder then you can basically select welder under 500.
I think after reading my post you have got all the answers about how the metal cutting tool helps in cutting. So I think you find my article an informative one.