Thermostats Issues That Causes Heating, Ventilation, and Air Conditioning Problems

Thermostats Issues That Causes Heating, Ventilation, and Air Conditioning Problems

Most Americans have central air conditioning and heating systems at their homes. And most of the rest have a furnace and use other forms of cooling equipment. If you have a furnace or central air and heating system, you likely know where the thermostat is. Thermostats are complicated parts of every HVAC system. Having some problems with your thermostat can be disappointing and will make your HVAC system break down. The good news is, Texas I. E Air Conditioning offers AC repair Allen and furnace installation for your homes and businesses.

Thermostat Issues

Most thermostats have run excellently for a long time. Homeowners have tried and tested this technology. If your thermostat is not running, a replacement is needed.

1.Thermostat Position at Home

If you do not incorrectly position your thermostat, then you will have some thermostat issues at home. You do not want to place your thermostat under direct sunlight, and it should be not less than 5 feet away from the door. Having the thermostat placed in the right position is critical because it is what controls the heating and cooling system when it works. In direct sunlight, for instance, the thermostat will read the temperature, and it is much hotter than usual. If it happens, AC will run nonstop, or your heater will not be enough. It also goes if your thermostat is close to any heat sources. Ensure that the location of your thermostat is away from any heat sources and direct sunlight. If it is not, call our HVAC expert to have it transferred to any place.

2.Thermostat Requires Cleaning

A typical thermostat problem that often results in the temperature never getting the setting you set for it. Dirt can accumulate inside the thermostat. When it occurs, it does not rightly measure the temp of the air in the house. You can clean an older thermostat by cleaning the dust inside the cover. To clean it, use some paper, and move it between the contacts to remove the dirt. If you are not confident enough in doing this, you could see an expert and get an HVAC maintenance service. In this way, an expert HVAC technician will ensure your HVAC system is running well.

3.Thermostat Is Not Level

It is a big issue on older thermostats as homes settle and change. If the thermostat is not level, it will not run as it should be. Mercury bulb thermostats need to be level to work precisely. If it is not level, the thermometer inside the system will not work immediately. It will make the thermostat almost worthless as it will not keep the correct temperature.

4.Thermostat Is Old

Older thermostats have many issues than newer thermostats. Like all components of your HVAC system, they are not going to serve you forever. The older a thermostat is, the higher a possibility it gets broken. Consider changing the thermostat with a new, programmable thermostat. It will ease any problem you might be experiencing and will assure years of efficiency.

5.Some Thermostats Are Battery-Operated

If you see that your thermostat is low power, you need to charge its batteries. Open the cover and place the new batteries, and that might solve the problem.

Without the right power to operate, the thermostat will not run. Like any electronic equipment, the thermostats require batteries to work. Without the batteries, no monitoring of temperature, and the system will not get the message to put the power on.

6.Incorrect Thermostat Installation

Many homeowners try to do-it-yourself. It can provide you a lot of advantages, yet, the HVAC systems are not simple to work on with no proper training and education. HVAC systems can be challenging for amateurs to fix. The sure indication of incorrect installation is if the wires are unfastened and not firmly attached to the thermostat. Do not attempt to pull out the thermostat yourself. Doing it can cause more damage and could even result in electrical problems at home. If the previous homeowner tried to put in a new thermostat, possibly, they did not wire it correctly. Sadly, this will often burn the thermostat. Do not try to fix or replace it unless you have the proper education and experience with the thermostats.

7.Program Errors

Thermostats are modern and computerized now. While these new and automated thermostats will run for many years with no or fewer problems, some thermostats are not precisely programmed. If you start experiencing issues with your thermostat, it could be a problem. The only solution to a malfunctioning thermostat is to have a replacement. With most of its parts, there is no way to repair them. Again, never attempt to fix yourself. Instead, call our expert HVAC technician at Texas I. E Air Conditioning.

Texas I.E HVAC Repair and Service are the Way to Go

Having a professional HVAC technician can inspect your thermostat and ensure it is working is the simplest solution. Most thermostat problems are related to the age of a thermostat and the accumulation of dirt and regular damage and crack. A new HVAC system can cost a lot of money for a replacement. Do not attempt to do anything to your HVAC system unless you are skilled and have the right background in HVAC repair. Call us here at Texas I. E  Air Conditioning, and we can get your HVAC system repaired and ready for any season to come. 

Check Also

The Rise of Extreme Weather Risks

The Rise of Extreme Weather Risks

In recent years, hurricanes have become an increasingly formidable force, posing significant threats to coastal …